Red Coat Blockout Kits "Adhesive Remover" Apply Enviro Wipe

"Adhesive Remover" Apply Enviro Wipe to the adhesive and allow to dwell for 30 to 90 seconds

strong contact to the point where the black ink on the film is almost embedded into the emulsion means that light has difficulty wrapping around the film

Enviro Clean will also reduce the incidence of "pinholes" when coating your screens with emulsion

Rub Resistance: Strong

Jumpstart your print shop today with the Riley Hopkins 150 Complete Screen Printing Kit

Red Coat Blockout Kits "Adhesive Remover" Apply Enviro WipeThis product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. I When the screen is dry and free of contaminants, pour RED COAT on the print side of the screen. Spread over the open areas of the screen until completely filled. II Touch up all defects, including heavy blobs which tend to dry the outside and pop off or smear during printing. Where very fine meshes are used, you